Articole științifice

Articole publicate in reviste cotate ISI și/sau Scopus

1. Nedelcu D., Cojocaru V., Nedeloni M.D., Peris-Bendu F., Ghican A., Failure analysis of a Ti-6Al-4V ultrasonic horn used in cavitation erosion tests, Mechanika, ISSN: 1392-1207, vol. 21, no. 4, 2015, pp. 272-276, DOI: 10.5755/j01.mech.21.4.10023;
2. Nedelcu D., Cojocaru V., Ghican A., Peris-Bendu F., Avasiloaie R., Considerations Regarding the Use of Polymers for the Rapid Prototyping of the Hydraulic Turbine Runners Designed for Experimental Research on the Model, Materiale Plastice, vol. 52 (4), 2015, pp. 475-479;
3. Cojocaru V., Campian C.V., Frunzaverde D., A comparative analysis of the methods used for testing the cavitation erosion resistance on the vibratory devices, U.P.B. Sci. Bull., Series D, Vol. 77, Iss. 4, 2015, ISSN 1454-2358, pp. 257-262;
4. Secoşan E.R.,, Ciubotariu R.C., Cojocaru V., Frunzaverde D., Campian C.V., Study Regarding the Cavitation Erosion Behaviour and Residual Stresses of Impact Resistant Hardfacing Materials, The 7th International Conference Innovative Technologies for Joining Advanced Materials, 19-20.06.2014, Timisoara, publicată în Advanced Materials Research, Vol. 1029, 2014, pp. 146-151, doi: 10.4028/www.scientific.net/AMR.1029.146
5. Cojocaru V., Miclosina C.O., Korka Z.I., Fatigue Analysis of Large Diameter Threaded Connections Subjected to Dynamic Axial Loads, The 6th International Conference on Advanced Concepts in Mechanical Engineering, 12-13.06.2014, Iaşi, publicată în Applied Mechanics and Materials, Vol. 658 (2014), pp. 177-182, doi: 10.4028/www.scientific.net/AMM.658.177
6. Cojocaru V., Korka Z.I., Miclosina C.O., Stress Analysis and Optimal Design of the Housing of a Two-Stage Gear Reducer, The 6th International Conference on Advanced Concepts in Mechanical Engineering, Iaşi, 12-13.06.2014, Iaşi, publicată în Applied Mechanics and Materials, Vol. 658, (2014), pp. 183-188, doi: 10.4028/www.scientific.net/AMM.658.183
7. Korka Z.I., Cojocaru V., Miclosina C.O., Simulation of the Tooth Helix Angle Influence on the Vibration of a Single Stage Helical Gearbox, The 6th International Conference on Advanced Concepts in Mechanical Engineering, 12-13.06.2014, Iaşi, publicată în Applied Mechanics and Materials, Vol. 658 (2014), pp. 83-88, doi:10.4028/www.scientific.net/AMM.658.83
8. Korka Z.I., Miclosina C.O., Cojocaru V., Some Aspects Regarding the Mathematical Modeling and Dynamic Simulation of a Single Stage Helical Gearbox, The 6th International Conference on Advanced Concepts in Mechanical Engineering, 12-13.06.2014, Iaşi, publicată în Applied Mechanics and Materials, Vol. 658 (2014), pp. 89-94, doi:10.4028/www.scientific.net/AMM.658.89
9. Cojocaru V., Câmpian C.V, Frunzăverde D., Micloşină C.O., Residual Stresses Analysis of Weld Overlays Coatings Used for the Repairs at Kaplan Turbine Runner Blades Areas Damaged by Cavitation Erosion, „Recent Researches in Environment, Energy Planning and Pollution”, Proceedings of the 5th International Conference on Renewable Energy Sources (RES '11) , Iaşi, July 1-3, 2011, pp. 225-229, ISSN 978-1-61804-012-1;
10. Micloşină C.O., Câmpian C.V., Frunzăverde D., Cojocaru V., Analysis of an Outer Bearing Bush of a Hydropower Plant Kaplan Turbine Using Finite Element Method, „Recent Researches In Environment, Energy Planning and Pollution”, Proceedings of the 5th International Conference on Renewable Energy Sources (RES '11), Iasi, Romania, July 1-3, 2011, pp. 221-224, ISSN 978-1-61804-012-1, 2011;
11. Cojocaru V., Balint D., Câmpian C.V., Nedelcu D., Jianu C., Numerical Investigations of Flow on the Kaplan Turbine Runner Blade Anticavitation Lip with Modified Cross Section, „Recent Researches in Mechanics”, Proceedings of the 2nd International Conference on Theoretical and Applied Mechanics 2011 (TAM '11), Corfu Island, Greece July 14-16, 2011, pp. 215-218, ISSN 978-1-61804-020-6, 2011;
12. Frunzăverde D., Câmpian C.V., Cojocaru V., Marginean G., Baran M., Ciubotariu R., Influence of welded layers thickness on the cavitation erosion resistance, Proceedings of 6th WSEAS International Conference on Energy, Environment, Ecosystems and Sustainable Development (EEESD '10), Timisoara, 21-23 oct. 2010, pp. 316-320, ISSN 1792-5924, 2010;
13. Pittner A.M., Câmpian C.V., Nedelcu D., Frunzăverde D., Cojocaru V., Stress concentration factors for pin lever of runner blade mechanism from Kaplan turbines, Proceedings of 3rd WSEAS International Conference on Engineering Mechanics, Structures, Engineering Geology (EMESEG '10), Corfu, 2010-07-2, pag. 181-185, ISSN 1792-4294, 2010;
14. Cojocaru V., Câmpian C.V., Frunzăverde D., Ion I., Cuzmoş A., Dumbravă C., Laboratory tests concerning the influence of surface hardening on the cavitation erosion resistance, Proceedings of 3rd WSEAS International Conference On Engineering Mechanics, Structures, Engineering Geology (EMESEG '10), Corfu, 2010-07-22, pag. 210-213, ISSN 1792-4294, 2010;
15. Cojocaru V., Frunzăverde D., Câmpian C.V., Marginean G., Ciubotariu R., Pittner A.M., Cavitation erosion investigations on thermal spray coatings, Proceedings of 3rd WSEAS International Conference On Engineering Mechanics, Structures, Engineering Geology (EMESEG '10), Corfu, 2010-07-22, pag. 177-180, ISSN 1792-4294, 2010;
16. Cojocaru V., Aspects Concerning the Development of Hybrid Propulsion Systems for Mobile Robots, „Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium Intelligent Manufacturing &Automation”, 25-28 Nov. 2009, Viena, Austria, pp. 1899-1900, ISSN 1726-9679,978-3-901509-70-4, 2009;